900mm x 600mm size can be shipped OK. 1200x900 is too large and subject to damage whilst Shipping. Therefore. 1200x900 is pick up from Northern Gold Coast only. Construction Health and Safety Site Sign manufactured on the Gold Coast, Queensland. Select eyelets for corflute if needed.
Forklift Hazard sign is to warn pedestrians of the danger that exists from forklifts. Likewise, there is a similar no access sign HERE. Also, read about us HERE
1.6mm thick Aluminium is great for pole signs, where you need a rigid sign. Aluminium can be used basically for any other mounting as well. Swing stand signs need aluminium and the larger one (900 x 600) are a stronger type. Most of our Aluminium signs have rounded corners.
0.55 mm thick Sign white colourbond. This is a baked enamel substrate that will resist rusting. Great for mounting on walls and fences. Most of the steel has round corners.
Polypropylene is 1.4mm thick and is white. It is very plyable and is classed as food safe. Caution must be used when mounting with glues, as some (such as construction adhesive) will damage the Polypropylene. A quality double sided tape is OK and some silicones. Avoid anything that is acid cured. Attaching with screws is OK.
This is the type of sign the real estate agents use. We use 3mm for the smaller signs and 5mm for the larger. Please see above (polypropylene) for advice for mounting.
Aside from the Budget signs, our vinyl is a top grade Polymeric vinyl, that has a 5 year life outdoors. We use a satin or Matt finish, to avoide glare.
Our ink is eco-solvent that is designed for outdoors. The ink actually etches into the sign via heat when printing. It resists scratching, but you can include an overlaminate to help protect it. This also prolongs the life of the sign.
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Thank You For Shopping With National Safety Signs
Copyright © 2021 ·
All Rights Reserved · National Safety Signs